Thursday, August 18, 2005

Team Development with Plone/ Zope/ ZEO/ Subversion/ ipython

Introduction
Team Development with Zope (7) can be problematic (1). The ZODB is a large binary file (var/Data.fs) that stores all information about a Zope instance, the ZODB is opaque to all but python. The ZODB is typically accessed Through The Web (TTW) using the Zope Management Interface (ZMI) typically http://localhost:8080/manage. All data controlled and published by Zope are held in this ZODB, while almost all available Source Control Management (SCM) and replication tools needed for version management and staging require a traditional file system representation of data. Though there is a simple version control mechanism built-in to the ZODB (one development line for single objects), this soon proves insufficient even for small applications (4). This post shows how to set up a zeo server with 2 clients, one acting as a web server, the other as an ipython interpreter (this gives us access to the ZODB object for debugging purposes) The following are typical requirements for Team Development in Plone:
  1. Use Source Control (CVS, Subversion, etc.).
  2. Setup environment so debugging is possible (11)
  3. File system based.
  4. Don't modify Zope or Plone through the ZMI so that different versions of Zope/Plone can be setup and tested without requiring TTW intervention.
  5. Allow off line development (Don't use a central development server)
Problems with Team Development in Zope
  1. Objects (Python Scripts, Images ZSQL Methods, etc.) are stored as binary objects in the Zope Object Database (ZODB).
  2. Can't use file system utilities such as grep, find for development.
  3. Editing documents is painful if your "favorite editor" doesn't work with the external editor tool (9).
  4. Can't use source control management, e.g. CVS, Subversion, on objects in the ZODB (exception: (CVSFile) and (ExternalFile) provide CVS through the ZMI).
  5. Can't write test suites for binary objects in database.
Possible solution
  1. Do not use ZMI at all ever!, use Filesystem Products (2) (6) (16).
    • Build products for each major feature (19) (20)
    • Build a site product for site customization (16)
    • Avoid disconnected External methods, scripts etc.
  2. Write scripts for creating your Plone instance and configuration (involves learning Zope/Plone api), commit these scripts to SCM.
While point 1 is covered well in the literature, it is not so easy to find scripts for setting up a Plone instance. This hack shows a bash script that sets up a Plone instance from a script and which installs the MySkin product into this Plone instance. This gives us the starting point for File system based Plone development. To execute this script and build plone 2.1 do the following (on linux, I use Gentoo and gcc 3.4.4).
mkdir ~/plonedev
cd ~/plonedev
wget -c http://homepage.eircom.net/~rachra/setupplonezeo.sh
wget -c http://homepage.eircom.net/~rachra/plonehelper.py
chmod +x setupplonezeo.sh
./setupplonezeo.sh 1 Acme
This should (all going well) leave you with the following directory structure
~/plonedev/    
    startPlone2.1-rc3.sh        # this script starts the zeo server on port 8100 and plone listening on port 8080
    startIPythonPlone2.1-rc3.sh # this script starts an IPython interpreter on your zeo_client1 (port 9080)
    debugPlone2.1-rc3.py        # a python script to start zeo_client0 (port 8080)
    plonehelper.py              # python helper script for creating a plone instance
                                # installing products and selecting a skin using the plone api
    myproducts/                 # this is where you develop your Zope/Plone products
    build/                      # the directory where you built Zope and Python
    src/                        # the directory where all downloads get stored
    zeo_py2.3.5_zo2.8.1-final_pl2.1-rc3/
        Python-2.3.5/            # a full python installation including ipython
        Zope-2.8.1-final/        # a full zope installation
        thirdpartyproducts/     # all 3rd party products for both zeo clients are stored (symlinked) here,
                                # you shouldn't edit these when developing as you may break your upgrade path
        zeo_server/             # the zeo server that contains the shared ZODB
        zeo_client0/            # the zeo client that will act as our webserver on port 8080
        zeo_client1/            # the zeo client that will act as our interactive debugger (port 9080)
To start the zeo server running on port 8100 and plone listening on port 8080 run the following
./startPlone2.1-rc3.sh
To start an ipython prompt with the ZODB app object in your namespace, run the following:
./startIPythonPlone2.1-rc3.sh
The script also builds a demo Plone instance called Acme with a custom filesystemskin located in the products directory at AcmeSkin (you should see that the plone logo has been replaced when you browse to http://localhost:8080/Acme. IPython can be set up for different colour console types. I had to edit ~/.ipython/ipythonrc as follows for my white background gnome-terminal,
115:# colors - Coloring option for prompts and traceback printouts.
116:
117:# Currently available schemes: NoColor, Linux, LightBG.
118:
119:# This option allows coloring the prompts and traceback printouts. This
120:# requires a terminal which can properly handle color escape sequences. If you
121:# are having problems with this, use the NoColor scheme (uses no color escapes
122:# at all).
123:
124:# The Linux option works well in linux console type environments: dark
125:# background with light fonts.
126:
127:# LightBG is similar to Linux but swaps dark/light colors to be more readable
128:# in light background terminals.
129:
130:# keep uncommented only the one you want:
131:#colors Linux
132:colors LightBG
133:#colors NoColor
134:
Try the following commands in ipython to get a feel for the plone api (make sure to test the TAB button for auto-completion.)
from Products.CMFPlone import transaction
for id, ref in app.objectItems(): print "%-25s: %s"% (id, repr(ref))
app.Acme.objectIds??
app.Acme.objectIds()
for k,v in app.Acme.contentItems(): print "%-11s: %s"%(k,repr(v))

# try out any of your own commands here, 
# DocFinderTab is installed and viewable through the ZMI for help with the Zope api

# to synchronize with the ZODB
app._p_jar.sync()
# to commit your changes to the database
transaction.commit()
Ctrl-d gets you out of the IPython prompt. Any changes you make to filesystem products are picked up automatically (if there is a refresh.txt file in the Products root directory) as Zope is setup here to run with debug-mode on. Don't forget to run ./stopPlone2.1-rc3.sh when you are finished to close the ZEO server and the Zope server. You can also use this script to set up a Plone 2.0.5 development environment e.g. to setup Plone 2.0.5 with a PloneId of TestSite on port 8888
./setupplonezeo.sh 0 TestSite 8888
This would leave you with the following directory structure (assuming you ran the command "./setupplonezeo.sh 1" previously)
~/plonedev/
    startPlone2.1-rc3.sh        # this script starts the zeo server on port 8100 and plone listening on port 8080
    startPlone2.0.5.sh          # this script starts the zeo server on port 9999 abd plone listening on port 8888
    startIPythonPlone2.1-rc3.sh # this script starts an IPython interpreter on your zeo_client1 (port 9080)    
    startIPythonPlone2.0.5.sh   # this script starts an IPython interpreter on your zeo_client1 (port 9888)
    debugPlone2.1-rc3.py        # a python script to start zeo_client0 (port 8080)
    debugPlone2.0.5.py          # a python script to start zeo_client0 (port 9080)
    plonehelper.py              # python helper script for creating a plone instance
                                # installing products and selecting a skin using the plone api
    myproducts/                 # this is where you develop your Zope/Plone products
    build/                      # the directory where you built Zope and Python
    src/                        # the directory where all downloads get stored
    zeo_py2.3.5_zo2.8.1-final_pl2.1-rc3/
        Python-2.3.5/            # a full python installation including ipython
        Zope-2.8.1-final/        # a full zope installation
        thirdpartyproducts/     # all 3rd party products for both zeo clients are stored (symlinked) here,
                                # you shouldn't edit these when developing as you may break your upgrade path
        zeo_server/             # the zeo server that contains the shared ZODB
        zeo_client0/            # the zeo client that will act as our webserver on port 8080
        zeo_client1/            # the zeo client that will act as our interactive debugger (port 9080)
    zeo_py2.3.4_zo2.7.4_pl2.0.5/
        Python2.3.4/            # a full python installation including ipython
        Zope-2.7.4-0/           # a full zope installation
        thirdpartyproducts/     # all 3rd party products for both zeo clients are stored (symlinked) here,
                                # you shouldn't edit these when developing as you may break your upgrade path
        zeo_server/             # the zeo server that contains the shared ZODB
        zeo_client0/            # the zeo client that will act as our webserver on port 8888
        zeo_client1/            # the zeo client that will act as our interactive debugger (port 9888)
This setup has the advantage that you can easily and quickly test your Zope products across two versions of Plone. If you get locking errors and ipython doesn't start you need to increase the sleep time to allow servers to start, e.g. to increase the sleep time to 63 seconds
./setupplonezeo.sh 0 TestSite 8888 63
References
  1. Why not to use Zope: http://www.amk.ca/python/writing/why-not-zope.html
  2. Plone best practices: https://plone.org/documentation/tutorial/best-practices/
  3. Team development with Plone/Zope: http://www.zope.org/Members/k_vertigo/Stories/TeamZope
  4. zsync: http://www.elegosoft.com/index_zync.html
  5. Unit testing plone: http://www.zope.org/Members/shh/Tutorial/PloneTestCase.pdf
  6. Scripting plone: http://docs.neuroinf.de/programming-plone
  7. Beginners guide to Zope/Plone: http://www.neuroinf.de/Miscellaneous/BeginnersGuide
  8. Introduction to Plone: http://docs.neuroinf.de/PloneBook
  9. Zope External Editor: http://www.zope.org/Members/Caseman/ExternalEditor
  10. Zope Test Case: http://www.zope.org/Members/shh/ZopeTestCase
  11. Debugging Zope: http://plone.org/Members/pupq/debug
  12. Debugging Zope: http://www.zope.org/Members/klm/ZopeDebugging/ConversingWithZope
  13. ZEO and debugging: http://www.zope.org/Members/dshaw/AdvancedSiteSetup
  14. Installing ZEO: http://www.plope.com/Books/2_7Edition/ZEO.stx
  15. Debugging Zope: http://zopewiki.org/DebuggingZopeWithPythonDebugger2
  16. MySkin Plone customization: http://www.ucl.ac.uk/is/fiso/engsciences/tutorials/plone/plone_pages/customise_plone2.htm
  17. Archetypes Development environment setup: http://plone.org/documentation/archetypes/wiki/SettingUpArchetypesProductDevelopmentEnvironment
  18. Archetypes home page: http://plone.org/documentation/archetypes
  19. Archetypes developers guide: http://plone.org/documentation/archetypes/ArchetypesDeveloperGuide
  20. ArchGenXML: http://plone.org/documentation/tutorial/archgenxml-getting-started
  21. Robust Plone installation with ZEO: http://plone.org/documentation/tutorial/robust-installation
  22. ipython: http://ipython.scipy.org/
  23. ipython tutorial: http://www.onlamp.com/pub/a/python/2005/01/27/ipython.html
  24. BoaDebugger: http://plone.org/documentation/how-to/how-to-debug-products-with-boa-constructor
  25. Installing Zope and Pone http://docs.neuroinf.de/programming-plone/appendixC#1-5
Scripts
setupplonezeo.sh
   1:#!/bin/bash
   2:E_NOARGS=65
   3:PloneId="Acme"
   4:ZOPE_PORT=8080
   5:SLEEPTIME=20 
   6:if [ -z "$1" ]
   7:then
   8:  echo "Usage: `basename $0` [plone-version, 0 or 1] [ploneid, default $PloneId] [zope-port, default $ZOPE_PORT] [sleep-time, default $SLEEPTIME]"
   9:  echo "e.g. to build Plone 2.1 with a PloneId of TestSite allowing 15 seconds for server to start on port 8888"
  10:  echo "`basename $0` 1 TestSite 8888 15"
  11:  exit $E_NOARGS
  12:fi
  13:#set -x
  14:
  15:base=`pwd`
  16:mkdir $base/{src,build}
  17:cd $base/src
  18:if [ "$1" -ne "0" ]
  19:then
  20:    PythonVersion="2.3.5"
  21:    ZopeVersion="2.8.1-final"
  22:    PloneVersion="2.1-rc3"
  23:    ZEO_PORT=8100    
  24:    wget -c http://www.zope.org/Products/Zope/2.8.1/Zope-$ZopeVersion.tgz    
  25:else    
  26:    PythonVersion="2.3.4"
  27:    ZopeVersion="2.7.4-0"
  28:    PloneVersion="2.0.5"
  29:    ZEO_PORT=9999    
  30:    wget -c http://www.zope.org/Products/Zope/2.7.4/Zope-$ZopeVersion.tgz    
  31:fi
  32:StartPloneScript=startPlone$PloneVersion.sh
  33:StopPloneScript=stopPlone$PloneVersion.sh
  34:StartIPythonScript=startIPython$PloneVersion.sh
  35:PythonDebugScript=debugPlone$PloneVersion.py
  36:if [ -n "$2" ]
  37:then 
  38:    PloneId=$2
  39:fi
  40:if [ -n "$3" ]
  41:then 
  42:    ZOPE_PORT=$3
  43:fi
  44:if [ -n "$4" ]
  45:then 
  46:    SLEEPTIME=$4
  47:fi
  48:PloneTitle=$PloneId
  49:PloneDescription="CMS Prototype"
  50:SkinName="${PloneId}Skin"
  51:INSTALL_HOME=$base/zeo_py${PythonVersion}_zo${ZopeVersion}_pl$PloneVersion
  52:# remove existing install
  53:rm -rf $INSTALL_HOME
  54:PYTHON_HOME=$INSTALL_HOME/Python-$PythonVersion
  55:ZOPE_HOME=$INSTALL_HOME/Zope-$ZopeVersion
  56:PYTHON=$PYTHON_HOME/bin/python
  57:PRODUCTS_DIR=$INSTALL_HOME/thirdpartyproducts
  58:MYPRODUCTS_DIR=$base/myproducts
  59:ZEOSERVER_DIR=$INSTALL_HOME/zeo_server
  60:ZEOCLIENT0_DIR=$INSTALL_HOME/zeo_client0
  61:ZEOCLIENT1_DIR=$INSTALL_HOME/zeo_client1
  62:INSTANCE_USER=manager
  63:INSTANCE_PASSWORD=manager
  64:
  65:# Get Python, Zope, Plone, MySkin, ipython and a sample logo
  66:wget -c http://www.python.org/ftp/python/$PythonVersion/Python-$PythonVersion.tgz
  67:wget -c http://heanet.dl.sourceforge.net/sourceforge/plone/Plone-$PloneVersion.tar.gz
  68:wget -c http://plone.org/products/myskin/releases/0.1/MySkin-0.1.tar.gz
  69:wget -c http://www.zope.org/Members/shh/DocFinderTab/0.5.2/DocFinderTab-0.5.2.tar.gz
  70:wget -c  http://homepage.eircom.net/~rachra/acme.jpg
  71:wget -c http://ipython.scipy.org/dist/ipython-0.6.15.tar.gz
  72:wget -c http://wingware.com/pub/wingide/2.0.3/WingDBG-2.0.3-2.tar
  73:
  74:# build Python
  75:cd $base/build
  76:tar -zxf $base/src/Python-$PythonVersion.tgz
  77:cd Python-$PythonVersion
  78:./configure --prefix=$PYTHON_HOME --enable-unicode=ucs4
  79:make 
  80:make install
  81:
  82:# install ipython
  83:cd $base/build
  84:tar -zxvf $base/src/ipython-0.6.15.tar.gz
  85:cd ipython-0.6.15
  86:$PYTHON setup.py install
  87:
  88:# build Zope
  89:cd $base/build
  90:tar -zxf $base/src/Zope-$ZopeVersion.tgz
  91:cd Zope-$ZopeVersion
  92:./configure --prefix=$ZOPE_HOME --with-python=$PYTHON 
  93:make 
  94:make install
  95:
  96:# make a zeo server instance
  97:$PYTHON $ZOPE_HOME/bin/mkzeoinstance.py $ZEOSERVER_DIR
  98:
  99:# make 2 zeo client instances
 100:$PYTHON $ZOPE_HOME/bin/mkzopeinstance.py -d $ZEOCLIENT0_DIR -u $INSTANCE_USER:$INSTANCE_PASSWORD
 101:$PYTHON $ZOPE_HOME/bin/mkzopeinstance.py -d $ZEOCLIENT1_DIR -u $INSTANCE_USER:$INSTANCE_PASSWORD
 102:
 103:# unzip Plone and copy into Products directory
 104:mkdir $PRODUCTS_DIR
 105:cd $base/build
 106:tar -zxf $base/src/Plone-$PloneVersion.tar.gz
 107:cd Plone-$PloneVersion
 108:cp -R * $PRODUCTS_DIR
 109:
 110:# install docfinder
 111:cd $PRODUCTS_DIR
 112:tar -zxf $base/src/DocFinderTab-0.5.2.tar.gz
 113:
 114:# install WingDebugger
 115:tar -xf $base/src/WingDBG-2.0.3-2.tar
 116:
 117:# install our own filesystem skin, this would come from source control normally
 118:# install MySkin Product
 119:mkdir $MYPRODUCTS_DIR
 120:cd $MYPRODUCTS_DIR
 121:tar -zxf $base/src/MySkin-0.1.tar.gz
 122:
 123:# move MySkin directories to $SkinName
 124:mv MySkin $SkinName
 125:mv $SkinName/skins/MySkin $SkinName/skins/$SkinName
 126:
 127:# Convert all instances of MySkin to $SkinName in all files
 128:cd $SkinName
 129:find . -exec  sed  -i -e "s/MySkin/$SkinName/g" {} \;
 130:
 131:# copy a logo in here to test if filesystem skin is working
 132:cp $base/src/acme.jpg $MYPRODUCTS_DIR/$SkinName/skins/$SkinName/logo.jpg
 133:
 134:# symlink Product directories between clients
 135:rm -rf $ZEOCLIENT0_DIR/Products
 136:ln -s $PRODUCTS_DIR $ZEOCLIENT0_DIR/Products
 137:rm -rf $ZEOCLIENT1_DIR/Products
 138:ln -s $PRODUCTS_DIR $ZEOCLIENT1_DIR/Products
 139:
 140:# write out the zope.conf files for each client
 141:# client0 listens on port $ZOPE_PORT
 142:cat << EOF > $ZEOCLIENT0_DIR/etc/zope.conf
 143:%define INSTANCE $ZEOCLIENT0_DIR
 144:%define ZOPE $ZOPE_HOME
 145:instancehome \$INSTANCE
 146:debug-mode on
 147:products $MYPRODUCTS_DIR
 148:<eventlog>
 149:  level info
 150:  <logfile>
 151:    path \$INSTANCE/log/event.log
 152:    level info
 153:  </logfile>
 154:</eventlog>
 155:<logger access>
 156:  level WARN
 157:  <logfile>
 158:    path \$INSTANCE/log/Z2.log
 159:    format %(message)s
 160:  </logfile>
 161:</logger>
 162:<http-server>
 163:  # valid keys are "address" and "force-connection-close"
 164:  address $ZOPE_PORT
 165:  # force-connection-close on
 166:</http-server>
 167:<zodb_db temporary>
 168:    # Temporary storage database (for sessions)
 169:    <temporarystorage>
 170:      name temporary storage for sessioning
 171:    </temporarystorage>
 172:    mount-point /temp_folder
 173:    container-class Products.TemporaryFolder.TemporaryContainer
 174:</zodb_db>
 175:<zodb_db main>
 176:   mount-point /
 177:   # ZODB cache, in number of objects
 178:   cache-size 5000
 179:   <zeoclient>
 180:     server localhost:$ZEO_PORT
 181:     storage 1
 182:     name zeostorage
 183:     var \$INSTANCE/var
 184:     # ZEO client cache, in bytes
 185:     cache-size 20MB
 186:     # Uncomment to have a persistent disk cache
 187:     #client zeo1
 188:   </zeoclient>
 189:</zodb_db>
 190:EOF
 191:
 192:# client1 listens on port $ZOPE_PORT+1000
 193:cat << EOF > $ZEOCLIENT1_DIR/etc/zope.conf
 194:%define INSTANCE $ZEOCLIENT1_DIR
 195:%define ZOPE $ZOPE_HOME
 196:instancehome \$INSTANCE
 197:debug-mode on
 198:products $MYPRODUCTS_DIR
 199:port-base 1000
 200:<eventlog>
 201:  level info
 202:  <logfile>
 203:    path \$INSTANCE/log/event.log
 204:    level info
 205:  </logfile>
 206:</eventlog>
 207:<logger access>
 208:  level WARN
 209:  <logfile>
 210:    path \$INSTANCE/log/Z2.log
 211:    format %(message)s
 212:  </logfile>
 213:</logger>
 214:<http-server>
 215:  # valid keys are "address" and "force-connection-close"
 216:  address $ZOPE_PORT
 217:  # force-connection-close on
 218:</http-server>
 219:<zodb_db temporary>
 220:    # Temporary storage database (for sessions)
 221:    <temporarystorage>
 222:      name temporary storage for sessioning
 223:    </temporarystorage>
 224:    mount-point /temp_folder
 225:    container-class Products.TemporaryFolder.TemporaryContainer
 226:</zodb_db>
 227:<zodb_db main>
 228:   mount-point /
 229:   # ZODB cache, in number of objects
 230:   cache-size 5000
 231:   <zeoclient>
 232:     server localhost:$ZEO_PORT
 233:     storage 1
 234:     name zeostorage
 235:     var \$INSTANCE/var
 236:     # ZEO client cache, in bytes
 237:     cache-size 20MB
 238:     # Uncomment to have a persistent disk cache
 239:     #client zeo1
 240:   </zeoclient>
 241:</zodb_db>
 242:EOF
 243:
 244:# start the zeo server
 245:$ZEOSERVER_DIR/bin/zeoctl start 
 246:sleep $SLEEPTIME # give the zeo server a chance to start
 247:
 248:# add a Plone Site Instance
 249:cd $base
 250:export PYTHONPATH=$ZOPE_HOME/lib/python:$PYTHONPATH
 251:$PYTHON plonehelper.py -c $ZEOCLIENT0_DIR/etc/zope.conf -i $PloneId -t $PloneTitle -d "$PloneDescription" -u $INSTANCE_USER -p $INSTANCE_PASSWORD  
 252:
 253:# Install our new skin product
 254:$PYTHON plonehelper.py -c $ZEOCLIENT0_DIR/etc/zope.conf -i $PloneId -n $SkinName
 255:
 256:# Set the default skin to our skin
 257:$PYTHON plonehelper.py -c $ZEOCLIENT0_DIR/etc/zope.conf -i $PloneId -s $SkinName
 258:
 259:$ZEOSERVER_DIR/bin/zeoctl stop
 260:
 261:cat << EOF > $base/$StartPloneScript
 262:#!/bin/bash
 263:set -x
 264:$ZEOSERVER_DIR/bin/zeoctl start
 265:sleep $SLEEPTIME # to allow zeo to start
 266:$ZEOCLIENT0_DIR/bin/zopectl start
 267:sleep $SLEEPTIME # to allow client 0 to start
 268:echo "Plone site is running on http://localhost:$ZOPE_PORT/$PloneId"
 269:EOF
 270:
 271:cat << EOF > $base/$StopPloneScript
 272:#!/bin/bash
 273:set -x
 274:$ZEOCLIENT0_DIR/bin/zopectl stop
 275:$ZEOSERVER_DIR/bin/zeoctl stop
 276:EOF
 277:
 278:chmod +x $base/$StartPloneScript
 279:chmod +x $base/$StopPloneScript
 280:
 281:# set up the ipython zope script
 282:cat << EOF > $base/$StartIPythonScript
 283:#!/bin/bash
 284:set -x
 285:export PYTHONPATH=$ZOPE_HOME/lib/python:$PYTHONPATH
 286:$PYTHON -i -c "from Zope import configure;configure('$ZEOCLIENT1_DIR/etc/zope.conf');import Zope; app=Zope.app();ns={'__name__':'blah','app':app};import IPython;IPython.Shell.IPShell(user_ns=ns).mainloop(sys_exit=1);"
 287:EOF
 288:
 289:chmod +x $base/$StartIPythonScript
 290:
 291:# set up a python script to allow debugging from various python debuggers
 292:cat << EOF > $base/$PythonDebugScript
 293:import sys, os, time
 294:print 'starting zeo server'
 295:os.system("$ZEOSERVER_DIR/bin/zeoctl start")
 296:print 'waiting for $SLEEPTIME seconds to allow zeo server to complete startup'
 297:time.sleep($SLEEPTIME)
 298:ZOPE_HOME="$ZOPE_HOME"  
 299:SOFTWARE_HOME= os.path.join(ZOPE_HOME,"lib","python")
 300:sys.path.insert(0, SOFTWARE_HOME )
 301:import Zope , ZPublisher
 302:sys.argv = ['run.py', '-C', '$ZEOCLIENT0_DIR/etc/zope.conf']
 303:Zope.Startup.run.run()
 304:EOF
 305:
 306:echo "Finished, you can either:"
 307:echo "run ./$StartPloneScript to start plone on http://localhost:$ZOPE_PORT/$PloneId"
 308:echo "the run ./$StartIPythonScript to inspect zope/plone api and ZODB"
 309:echo "run ./$StopPloneScript to stop plone"
 310:echo "or run (from your development environment)"
 311:echo "python $PythonDebugScript"
 312:echo "run ./$StopPloneScript to stop the zeo server when you stop the python script"
 313:
plonehelper.py
   1:"""
   2:plonehelper.py -c configFile -i plone_id -t plone_title -d plone_description -u username -p password
   3:
   4:functions to add and adminsiter a Plone Site from script
   5:"""
   6:import sys
   7:import getopt
   8:from Zope.Startup.run import configure
   9:import Zope
  10:import urllib
  11:#from Products.CMFPlone import transaction
  12:import time
  13:
  14:version=0.1
  15:
  16:def add_plone_site(app, plone_id, plone_title, plone_description, username, password):
  17:    req ='/manage_addProduct/CMFPlone/manage_addSite?id=%s&title=%s&create_userfolder=1&description=%s&custom_policy=Default+Plone&submit=+Add+Plone+Site+'%(urllib.quote(plone_id), urllib.quote(plone_title), urllib.quote(plone_description))
  18:    Zope.debug(req,u='%s:%s'%(username, password))
  19:    
  20:def set_default_skin(ploneSite, skin_name):
  21:    # set our new skin as the default skin        
  22:    ploneSite.portal_skins.default_skin = skin_name
  23:        
  24:def install_product(ploneSite, product_name):
  25:    # install the product
  26:    quick_installer =  ploneSite.portal_quickinstaller        
  27:    quick_installer.installProduct(product_name)
  28:    #print  quick_installer.listInstalledProducts()
  29:
  30:def main(argv = None):
  31:    if argv is None:
  32:        argv = sys.argv                
  33:    config_file = None
  34:    username = ''
  35:    password = ''
  36:    plone_id = ''
  37:    plone_title = None
  38:    plone_description = ''    
  39:    skin_name = None
  40:    product_name = None
  41:    try:
  42:        opts, args = getopt.getopt(argv[1:], "hvc:i:t:d:u:p:s:n:", ["help", "version"])
  43:    except getopt.error, msg:
  44:        print msg
  45:        print(__doc__)
  46:        sys.exit(0)        
  47:    for o, a in opts:
  48:        if o in ("-h", "--help"):
  49:            print(__doc__)
  50:            sys.exit(0)
  51:        elif o in ("-v", "--version"):
  52:            log("version: %s"%version)
  53:            sys.exit(0)
  54:        elif o in ("-c"):
  55:            config_file = a
  56:        elif o in ("-u"):
  57:            username = a            
  58:        elif o in ("-p"):
  59:            password = a
  60:        elif o in ("-i"):
  61:            plone_id = a
  62:        elif o in ("-t"):
  63:            plone_title = a
  64:        elif o in ("-d"):
  65:            plone_description = a
  66:        elif o in ("-s"):
  67:            skin_name = a
  68:        elif o in ("-n"):
  69:            product_name = a
  70:    
  71:    if config_file is not None:
  72:        configure(config_file)
  73:        app = Zope.app()
  74:        if plone_id is not None:
  75:            if plone_title is not None:
  76:                add_plone_site(app, plone_id, plone_title, plone_description, username, password)
  77:            else:          
  78:                ploneSite = eval('app.'+plone_id)
  79:                if ploneSite != None:
  80:                    if product_name is not None:
  81:                        install_product(ploneSite, product_name)             
  82:                    if skin_name is not None:
  83:                        set_default_skin(ploneSite, skin_name)
  84:                else:
  85:                    print 'Could not find plone site with id ', plone_id
  86:                # commit these changes        
  87:                get_transaction().commit()
  88:                #transaction.commit()
  89:        else:
  90:            print 'you must specify a unique plone id to create a plone site'
  91:    else:
  92:        print 'you must supply a configuration file: /path/to/zope.conf'
  93:
  94:if __name__=='__main__':
  95:    main()

No comments: